TuttoCAD Forum
[
Home
|
Registrati
|
Discussioni Attive
|
Discussioni Recenti
|
Segnalibro
|
Msg privati
|
Sondaggi Attivi
|
Utenti
|
Album Fotografico
|
Download
| |
Cerca
|
FAQ
]
Nome Utente:
Password:
Salva Password
Password Dimenticata?
Tutti i Forum
1 - TuttoCAD Software
AutoLISP
Spostare in modo casuale una selezione di oggetti
Nuova Discussione
Rispondi
Versione Stampabile
Aggiungi Segnalibro
Qui c'è:
Autore
Discussione
arri
Utente Master
Regione: Lombardia
14951 Messaggi
Inserito il - 23 febbraio 2011 : 14:35:24
Sometimes it is necessary to apply a random element to your technical drawings, which will make your design more "human". Blocks of cars in the parking lot, placed with the ARRAY command will not look natural, trees spaced along the road with the MEASURE command usually do not grow at precise intervals. Rigid spacing and right angles may disturb the impression. For these and similar cases you can use our LISP utility CADstudio Scatter. This tool scatters the selected objects - moves (nudges) each of them for a random displacement. You can select the move in 2D, in 3D, or only in one of the axes (e.g. only in Z).You can download the Scatter utility from www.cadstudio.cz/download, load it with the APPLOAD command and start it with the SCATTER command.
arri
Utente Master
Regione: Lombardia
14951 Messaggi
Inserito il - 24 giugno 2015 : 14:28:07
http://www.cadforum.cz/cadforum_en/random-scatter-of-autocad-drawing-objects-tip9042
Discussione
Nuova Discussione
Rispondi
Versione Stampabile
Aggiungi Segnalibro
Vai a:
Seleziona Forum
0 - Discussioni in primo piano
Pirateria del software: NO GRAZIE!
0 - CADLandia Magazine
CADLandia Magazine
1 - TuttoCAD Software
Rhinoceros 3D
Revit
Programmazione CAD
Modellatori tridimensionali e raytracing
Microstation
IntelliCAD
CoCreate
Cinema 4D
bCAD
AutoLISP
AutoCAD
Art*Lantis
ArchLine
Architectural Desktop
ArchiCAD
AddCAD
3d Studio Max (e Viz)
1 - Il forum sul software
2 - TuttoCAD Hardware
Stampanti e plotter
Schede Video
Retrocomputing
Notebook e palmari
Monitor
Memorie di massa
CPU e RAM
2 - Il forum sull'hardware
3 - TuttoCAD Generalista
Topografia
Progetto Standard CAD
Problemi di stampa
Grafica 2D
Glossario
GIS
Elementi finiti
Design
Conversione e condivisione di file
4 - TuttoCAD varie
Supporto per il materiale sul sito
Richieste e suggerimenti
--------------------
Home Page
Discussioni Attive
Domande Frequenti
Lista Utenti
Pagina di Ricerca
TuttoCAD Forum
© 2001-2010 CADLandia
Pagina generata in 0,26 secondi.