TuttoCAD Forum

TuttoCAD Forum
[ Home | Registrati | Discussioni Attive | Discussioni Recenti | Segnalibro | Msg privati | Sondaggi Attivi | Utenti | Album Fotografico | Download | | Cerca | FAQ ]
Nome Utente:
 Password:
Salva Password
Password Dimenticata?

 Tutti i Forum
 1 - TuttoCAD Software
 Revit
 Converting AutoCAD Details to Revit		  Nuova Discussione  Rispondi
 Versione Stampabile Bookmark this Topic Aggiungi Segnalibro
I seguenti utenti stanno leggendo questo Forum Qui c'č:
Autore Discussione Precedente Discussione Discussione Successiva  

arri
Utente Master


Regione: Lombardia


14951 Messaggi
Inserito il - 07 febbraio 2013 : 08:28:27  Mostra Profilo Invia a arri un Messaggio Privato  Rispondi Quotando
Details are a vital part of the documentation process for building design and construction projects. CAD users who have used AutoCAD for years have typically developed a large detail library, or at least possess many details used on previous AutoCAD projects. Those details are valuable as a lot of time and knowledge has gone into developing them. It is important to be able to access those details for usage within Revit.

While there are various methods utilized for re-using AutoCAD details, not all of them are good solutions and some can add corruption to your Revit project file and create problems.

The best long-term solution for re-using AutoCAD details is to migrate the details into Revit native entities. While inserting and then exploding details is a common practice, it creates residual information in the file and requires time and effort to clean up.

My recommended practice to migrate AutoCAD details to Revit is basically a quick 3-step process:

Link the AutoCAD detail into Revit;
Trace the AutoCAD linework with Revit tools to create native Revit elements;
Remove linked AutoCAD detail
Link the AutoCAD Detail into Revit

Create a new Drafting View from the View tab and the Create panel. Name the view per your company’s naming standards and specific to the detail that you will create. Set the scale appropriate to the detail.
On the Insert tab, select the Link CAD function from the Link panel. Select the desired AutoCAD detail and select positioning to be “Auto – Center to Center”.
  Discussione Precedente Discussione Discussione Successiva  
 Nuova Discussione  Rispondi
 Versione Stampabile Bookmark this Topic Aggiungi Segnalibro
Vai a:
TuttoCAD Forum © 2001-2010 CADLandia Torna all'inizio della Pagina
Pagina generata in 0,3 secondi.