TuttoCAD Forum

TuttoCAD Forum
[ Home | Registrati | Discussioni Attive | Discussioni Recenti | Segnalibro | Msg privati | Sondaggi Attivi | Utenti | Album Fotografico | Download | | Cerca | FAQ ]
Nome Utente:
Password:
Salva Password
Password Dimenticata?

 Tutti i Forum
 1 - TuttoCAD Software
 AutoCAD
 AutoCAD 2009 - notizie
 Nuova Discussione  Rispondi
 Versione Stampabile Bookmark this Topic Aggiungi Segnalibro
I seguenti utenti stanno leggendo questo Forum Qui c'č:
Pagina Precedente | Pagina Successiva
Autore Discussione Precedente Discussione Discussione Successiva
Pagina: di 11

arri
Utente Master


Regione: Lombardia


14951 Messaggi

Inserito il - 04 dicembre 2008 : 11:13:41  Mostra Profilo Invia a arri un Messaggio Privato  Rispondi Quotando
AutoCAD freezes when plotting to file
Torna all'inizio della Pagina

arri
Utente Master


Regione: Lombardia


14951 Messaggi

Inserito il - 05 dicembre 2008 : 11:07:47  Mostra Profilo Invia a arri un Messaggio Privato  Rispondi Quotando
Reset Most Recently Used Files list

As of the 2009 release, AutoCAD started to list recent DST and DWG files in the most recently used documents list. Unfortunately, after 9 DST files have been opened, the list will never contain DWG files again. This command (RMRUF) will completely reset the list, which should make it useful until you've opened 9 sheet sets again. At that point, simply re-run the command.
Torna all'inizio della Pagina

arri
Utente Master


Regione: Lombardia


14951 Messaggi

Inserito il - 09 dicembre 2008 : 08:46:38  Mostra Profilo Invia a arri un Messaggio Privato  Rispondi Quotando
AutoCAD 2009 Bonus Pack 2 - PDF Output Quality Improvements and File Size Reductions
Torna all'inizio della Pagina

arri
Utente Master


Regione: Lombardia


14951 Messaggi

Inserito il - 15 dicembre 2008 : 08:44:56  Mostra Profilo Invia a arri un Messaggio Privato  Rispondi Quotando
Run AutoCAD on a Mac

Currently at Autodesk we have tested AutoCAD 2007, 2008, and 2009 on the Mac in Apple Bootcamp and virtualized solutions VMWare Fusion, and Parallels Desktop. AutoCAD is not officially supported on the Mac, but works just fine as have other Autodesk Windows based products like Revit and 3ds max.
Torna all'inizio della Pagina

arri
Utente Master


Regione: Lombardia


14951 Messaggi

Inserito il - 17 dicembre 2008 : 12:03:04  Mostra Profilo Invia a arri un Messaggio Privato  Rispondi Quotando
Forcing DWG format version for save in AutoCAD

AutoCAD allows to save DWG drawing files also in older versions of the DWG format. This setting for the DWG format can be done in the Options dialog, on the "Open and Save" tab.

With the following less-known trick you can force an older save format also from a menu macro, from a LISP utility or through a site-wide setting in the Registry (e.g. using GPO, logon script, etc.).

The default save format in AutoCAD is controlled by the environment variable "DefaultFormatForSave". This value is stored in the Registry - e.g.:

HKEY_CURRENT_USER\Software\Autodesk\AutoCAD\R17.2\ACAD-7001:409\Profiles\<< Unnamed profile >>\General

and you can set it with the function (setenv).

This variable can be set to the following values:

* 48 - AutoCAD 2010 DWG format (estimated)
* 36 - AutoCAD 2007 DWG format
* 24 - AutoCAD 2004 DWG format
* 12 - AutoCAD 2000 DWG format

So e.g. the function (setenv "DefaultFormatForSave" "24") will set the default save format in AutoCAD 2009 to DWG2004.
Torna all'inizio della Pagina

arri
Utente Master


Regione: Lombardia


14951 Messaggi

Inserito il - 22 dicembre 2008 : 08:58:47  Mostra Profilo Invia a arri un Messaggio Privato  Rispondi Quotando
How to customize properties displayed in the Properties palette?

If you want show only specific properties (categories) in the Properties palette (window, panel) and supress all other items, you can use the new Quick properties panel (Ctrl+Shift+P) instead of Properties. The older Properties palette can be customized only programmatically.
The "Quick properties" panel is fully customizable and you can setup which properties are displayed for which object types - use the CUI dialog.

The display mode fo the Quick properties panel is controlled by the variables QPLOCATION and QPMODE.
Torna all'inizio della Pagina

arri
Utente Master


Regione: Lombardia


14951 Messaggi

Inserito il - 07 gennaio 2009 : 12:51:55  Mostra Profilo Invia a arri un Messaggio Privato  Rispondi Quotando
AutoCAD Xclip xrefs in 3D tips and tricks
Torna all'inizio della Pagina

arri
Utente Master


Regione: Lombardia


14951 Messaggi

Inserito il - 08 gennaio 2009 : 12:42:10  Mostra Profilo Invia a arri un Messaggio Privato  Rispondi Quotando
Minisito AutoCAD LT 2009

Autodesk pubblica un minisito per il prodotto di punta AutoCADŽ LT 2009.
Una pagina completamente dedicata a questo prodotto per esplorarne tutte le caratteristiche, con delle demo multimediali che affrontano i problemi pricipali del disegno CAD. Tra i titoli delle screencast troviamo "Disegno di forme base" e "Operare con disegni esistenti" assolutamente da non perdere. Ben curata la grafica sempre in stile Autodesk e i contenuti dove č possibile apprendere in poche lezioni i rudimenti di AutoCAD LT 2009.


In questo minisito c'č anche il link per poter scaricare la demo che dura 30 giorni
Torna all'inizio della Pagina

diaz83
Nuovo Arrivato



1 Messaggi

Inserito il - 09 gennaio 2009 : 17:19:07  Mostra Profilo Invia a diaz83 un Messaggio Privato  Rispondi Quotando
autocad 2009 ha una doppia anima, una e quella del tradizionale sotware cioe(classic cad) e l'altra e quella che ti compare appena l'installi
Torna all'inizio della Pagina

arri
Utente Master


Regione: Lombardia


14951 Messaggi

Inserito il - 09 gennaio 2009 : 17:33:57  Mostra Profilo Invia a arri un Messaggio Privato  Rispondi Quotando
Citazione:
Messaggio inserito da diaz83

autocad 2009 ha una doppia anima, una e quella del tradizionale sotware cioe(classic cad) e l'altra e quella che ti compare appena l'installi



http://www.cadlandia.com/forum/topic.asp?TOPIC_ID=9087&whichpage=3

Inserito il - 01 aprile 2008 : 08:39:22
Torna all'inizio della Pagina

ddddd
Nuovo Arrivato


Regione: Abruzzo
Cittā: ssssssss


5 Messaggi

Inserito il - 19 gennaio 2009 : 11:46:44  Mostra Profilo Invia a ddddd un Messaggio Privato  Rispondi Quotando
problema con autocad 2009
su copia con punto base e incolla come blocco mi da errore irreversibile, e mi butta fuori.... qualcuno sa darmi una mano
Torna all'inizio della Pagina

arri
Utente Master


Regione: Lombardia


14951 Messaggi

Inserito il - 19 gennaio 2009 : 11:49:19  Mostra Profilo Invia a arri un Messaggio Privato  Rispondi Quotando
Citazione:
Messaggio inserito da ddddd

problema con autocad 2009
su copia con punto base e incolla come blocco mi da errore irreversibile, e mi butta fuori.... qualcuno sa darmi una mano




apri una nuova discussione
Torna all'inizio della Pagina

GimmiGIS
Utente



Regione: Lombardia
Prov.: Milano
Cittā: Vimercate


18 Messaggi

Inserito il - 23 gennaio 2009 : 17:52:58  Mostra Profilo Invia a GimmiGIS un Messaggio Privato  Rispondi Quotando
Manuali per AutoCAD ed AutoCAD Map 3D!
Finalmente ho completato la ricerca.
Leggi tutto qui:
http://map3d.blogspot.com/2009/01/manuali-di-autocad-in-italiano.html

GimmiGIS

www.3dmap.it
Torna all'inizio della Pagina

arri
Utente Master


Regione: Lombardia


14951 Messaggi

Inserito il - 23 gennaio 2009 : 18:55:45  Mostra Profilo Invia a arri un Messaggio Privato  Rispondi Quotando
Installing AutoCAD Bonus Pack on AutoCAD vertical products
Torna all'inizio della Pagina

arri
Utente Master


Regione: Lombardia


14951 Messaggi

Inserito il - 28 gennaio 2009 : 08:14:36  Mostra Profilo Invia a arri un Messaggio Privato  Rispondi Quotando
AutoCAD 2009 Quick View Layouts and Drawings
Torna all'inizio della Pagina

arri
Utente Master


Regione: Lombardia


14951 Messaggi

Inserito il - 02 febbraio 2009 : 12:36:07  Mostra Profilo Invia a arri un Messaggio Privato  Rispondi Quotando
Live Update Hotfix

valido anche per le versioni 2004 - 2005 - 2006
Torna all'inizio della Pagina

arri
Utente Master


Regione: Lombardia


14951 Messaggi

Inserito il - 18 febbraio 2009 : 15:59:55  Mostra Profilo Invia a arri un Messaggio Privato  Rispondi Quotando
Low Tech solution to AutoCAD 2009's Memory Leak...

First open your Task Manager... switch to Processes and sort by Mem Usage.

Then open a large drawing in AutoCAD 2009 (any flavor).. choosing one with several viewports make it even more interesting.

Once opened.. Minimize the complete AutoCAD session window (not just the drawing).

ACAD Memory Usage drops almost 90% once the window is minimized.

Now Reopen the minimized AutoCAD window and the memory returns to a workable level.

The ACAD memory still does a serious memory ramp up during any saving function which is still a problem for us.

This technique seems useful in reclaiming or resetting AutoCAD's memory usage without restarting.
Torna all'inizio della Pagina

arri
Utente Master


Regione: Lombardia


14951 Messaggi

Inserito il - 24 febbraio 2009 : 15:15:57  Mostra Profilo Invia a arri un Messaggio Privato  Rispondi Quotando
MAP 2009 - Civil 2009

How to set a coordinate system with a single button?

If you often need to change or assign a coordinate system in your drawings (maps), you may need a commandline version of the coord.systems command in Map (a dialog-based command by default).
You can use e.g. the following LISP macro:


(defun C:SetWGS ()
(setvar "CMDDIA" 0)
(command "ADESETCRDSYS" "_ses" "LL84" "_ex")
(setvar "CMDDIA" 1)
(princ)
)

The newly defined command SetWGS can be then assigned to a toolbar button or keyboard shortcut.
Another - simpler method is to use the LISP function:


(ade_projsetwscode "LL84")
Torna all'inizio della Pagina

n/a
deleted

Prov.: Estero
Cittā: Sieradz (PL)


5926 Messaggi

Inserito il - 24 febbraio 2009 : 15:29:00  Mostra Profilo  Rispondi Quotando
Citazione:
Messaggio inserito da arri
If you often need to change or assign a coordinate system


Questa e' un'altra da morir dal ridere, soprattutto in quel "often".

Mi rivolgo a Gimmigis: quante volte in una singola mappa dai il comando ADESETCRDSYS..?

Io un numero di volte maggiore di 0 e minore di 2, e tu?


Torna all'inizio della Pagina

arri
Utente Master


Regione: Lombardia


14951 Messaggi

Inserito il - 25 febbraio 2009 : 08:13:32  Mostra Profilo Invia a arri un Messaggio Privato  Rispondi Quotando
How to set transparent color for my own AutoCAD icons

If you need to creaty a partially "transparent" toolbar icons, you cannot use standard ways of PNG format with alpha-channel or transparent GIF files - AutoCAD supports only icons in the BMP format which doesn't work with transparency.
But you can use a trick - the color with the hue of 192-192-192 (RGB) used in icons is interpreted by AutoCAD as "transparent".
Torna all'inizio della Pagina
Pagina: di 11 Discussione Precedente Discussione Discussione Successiva  
Pagina Precedente | Pagina Successiva
 Nuova Discussione  Rispondi
 Versione Stampabile Bookmark this Topic Aggiungi Segnalibro
Vai a:
TuttoCAD Forum © 2001-2010 CADLandia Torna all'inizio della Pagina
Pagina generata in 0,41 secondi.