| Autore |
 Discussione  |
|
arri
Utente Master
Regione: Lombardia
14951 Messaggi |
|
|
arri
Utente Master
Regione: Lombardia
14951 Messaggi |
|
|
arri
Utente Master
Regione: Lombardia
14951 Messaggi |
|
|
arri
Utente Master
Regione: Lombardia
14951 Messaggi |
 Inserito il - 04 marzo 2014 : 11:56:35
|
Modelspace to Paperspace
Program Description
This program allows the user to copy a selection of objects from Modelspace to the current Paperspace layout through an active viewport.
This functionality is similar to the standard CHSPACE command, however, this program will copy the selection of objects, as opposed to moving the objects from Modelspace to Paperspace. I realise that this functionality could also be quite easily achieved by copying the selection of objects and proceeding to use the CHSPACE command with the copied selection, however, by avoiding the use of this standard command, this program provided an excellent exercise in matrix mathematics from which others may also benefit.
Upon issuing the command ms2ps at the AutoCAD command-line, the user is prompted to make a selection of objects to copy. Following a valid selection, the program will copy the objects to the active Paperspace layout, before performing the necessary matrix transformations to maintain the visual appearance of the objects as displayed through the active viewport.
The program is compatible with rectangular & polygonal viewports, under all UCS & view settings, and with objects constructed in any UCS construction plane.
Note that the command is only available when a Paperspace Layout is set current, and with a viewport active. |
 |
|
|
arri
Utente Master
Regione: Lombardia
14951 Messaggi |
|
|
arri
Utente Master
Regione: Lombardia
14951 Messaggi |
Inserito il - 10 luglio 2014 : 14:13:17
|
| SuperTools |
|
|
|
arri
Utente Master
Regione: Lombardia
14951 Messaggi |
|
|
arri
Utente Master
Regione: Lombardia
14951 Messaggi |
|
|
arri
Utente Master
Regione: Lombardia
14951 Messaggi |
|
|
arri
Utente Master
Regione: Lombardia
14951 Messaggi |
Inserito il - 19 marzo 2015 : 11:48:58
|
How to make DWG texts readable in a 3D view (align to view)?
If you need to display your drawing containing texts (e.g. labeled survey points, legends, isometrics) from a general 3D direction view or even from the text plane (front view, side view), the texts will not be readable.
With a simple utility ViewText you can automatically align selected texts perpendicular to the vector of the current view and so make them readable (upright).
Download the ViewText add-on application from www.cadstudio.cz/download, load it with APPLOAD and start the VIEWTEXT command. Select the texts, paragraph texts or points and the application will rotate (align) them in the direction of the currently set 3D view in AutoCAD. |
|
|
|
arri
Utente Master
Regione: Lombardia
14951 Messaggi |
|
|
arri
Utente Master
Regione: Lombardia
14951 Messaggi |
Inserito il - 31 agosto 2015 : 15:18:39
|
Stretched move, proportional object move in AutoCAD.
With the freeware utility SMove for AutoCAD you can move selected DWG objects in such way, that objects distant from the reference point will be moved/stretched more than close objects. Only the insertion point of the individual objects is changed, not their geometry.
Download Smove.vlx |
|
|
|
arri
Utente Master
Regione: Lombardia
14951 Messaggi |
|
|
arri
Utente Master
Regione: Lombardia
14951 Messaggi |
|
|
aforza
Utente Master
Regione: Italia
Prov.: Padova
Città: Cavarzere(VE)-Monselice(PD)
1798 Messaggi |
Inserito il - 17 dicembre 2015 : 17:29:45
|
| Messaggio inserito da arri
eseguire automaticamente macro incorporate in un dwg.........
|
ah però!!!!
Bella questa..
Ciao |
Andrea Forza
CadWorx 2014 & Plant3D AutoCAD 2014 su Seven 64bit - Dell Vostro i7 ram 8gb - doppio monitor Hanns-g 22" |
|
|
|
arri
Utente Master
Regione: Lombardia
14951 Messaggi |
|
|
arri
Utente Master
Regione: Lombardia
14951 Messaggi |
Inserito il - 22 gennaio 2016 : 11:49:47
|
How to find which AutoCAD version was used to save a particular DWG
By default, a DWG file displays only the information about the user/author name and the originating group of AutoCAD versions sharing a common DWG file format (more info).
By automatic storing of additional information (see PreSave below) you can subsequently display the exact AutoCAD version used to save the drawing file.
With newer DWG file versions saved from AutoCAD (any vertical version, including LT), but not from Inventor or Revit, you can find out detailed information about the AutoCAD version and language (flavour, language localization, build number - resp. the service pack), which was used to save the drawing, even without previously storing auxiliar data to custom properties.
For this, you can use the .NET application DWGintVer available on our Helpdesk server - see www.cadstudio.cz/download. Load the DLL file into your AutoCAD with NETLOAD and run the command DWGINTVER. This tool displays an information dialog with data about the authoring product - use it of course before you save the DWG on your own AutoCAD. |
|
|
|
numero1
Utente Master
Città: Da qualche parte
683 Messaggi |
Inserito il - 23 gennaio 2016 : 15:23:14
|
Ma scusa arri, il vecchio metodo per ricavare quest'informazione era aprire il dwg con un editor di testo e:
AC1027 AutoCAD 2013
AC1024 AutoCAD 2010/2011/2012
AC1021 AutoCAD 2007/2008/2009
AC1018 AutoCAD 2004/2005/2006
AC1015 AutoCAD 2000/2000i/2002
AC1014 Release 14
AC1012 Release 13
AC1009 Release 11/12
AC1006 Release 10
AC1004 Release 9
AC1003 Version 2.60
AC1002 Version 2.50
AC1001 Version 2.22
AC2.22 Version 2.22
AC2.21 Version 2.21
AC2.10 Version 2.10
AC1.50 Version 2.05
AC1.40 Version 1.40
AC1.2 Version 1.2
MC0.0 Version 1.0
Questa mi sembra una utility solo per utenti molto pigrons, quasi alla pari di dwgicon, dwgcolumn e dwgversion.
Forse che il vecchio metodo non è più valido ? |
numero1 |
|
|
|
arri
Utente Master
Regione: Lombardia
14951 Messaggi |
Inserito il - 23 gennaio 2016 : 21:08:24
|
[quote]Messaggio inserito da numero1
Forse che il vecchio metodo non è più valido ?
è ancora valido  |
|
|
|
arri
Utente Master
Regione: Lombardia
14951 Messaggi |
Inserito il - 30 marzo 2016 : 14:02:58
|
Lisp : Settingout Table
Settingout Table Lisp will create a coordinates and elevation table according to the attribute block placed in the drawing. |
|
|
|
Discussione |
|
CadTools, free
